FREQUENCY HOPPING FOR VHF/UHF TRANSCEIVER
USING DSP
USING DSP
Abstract
It is possible for a receiver to trap any message signal if it is tuned to that particular frequency.
To maintain secrecy of the message signal the process of Frequency Hopping is employed in V/UHF transceivers operating in hopping mode in the UHF range when ECCM module is inserted which issues hop pulses, which are presently 8 to 40 hops/sec along with the frequency information to the Synthesizer module using DSP Technology. Central timing unit synchronizes both transmitter and receiver simultaneously.
The ECCM commands are sent to the TMS320C5X DSP processor and latch circuits and then to the synthesizer module. When the hop pulse occurs from the ECCM module, the frequency information along with the hop pulse is sent to the Synthesizer module as it is. In between the original hop pulses; the program for DSP processor will generate new frequencies, which will act as hop pulses for the V/UHF transceiver.
It is used mainly in defence applications as well as in the fields where secrecy
of messages is needed.
